Front-Load Washer Drain Pump and Motor Assembly (LG OEM)

Description

Genuine LG OEM Front-Load Washer Drain Pump and Motor Assembly – Part 4681EA2001T

120V 60Hz 85W drain pump motor. Reuse existing pump housing. Includes impeller. OE error code fix.

Part Number: 4681EA2001T

Replaces: AP5328388, 4681EA1007G, 2003273, 4681EA1007D, 4681EA2001D, 4681EA2001N, 4681EA2001U, AH3579318, EA3579318, PS3579318

Always verify compatibility using your appliance model number before ordering.

LG Washer Drain Pump & Motor Assembly

Ensure your washing machine drains properly with this Genuine OEM Drain Pump & Motor. This assembly (Part # 4681EA2001T) is responsible for forcing water out of the drum and through the drain hose at the end of each cycle. If your washer stops with water still in the tub, won’t spin, or displays an “OE” error code, this motor has likely failed or become clogged.

Manufactured by LG, this factory-certified part is engineered to the exact voltage and flow-rate specifications of your machine. It features a high-torque motor designed to handle heavy drainage loads and discharge water quickly so your clothes come out ready for the dryer.

Quick Info:

• Compatibility: Genuine part for select LG, Sears, and Kenmore front-load and top-load washers.

• Fixes Common Issues: Resolves “OE” (Drain Error) codes, standing water in the tub, and loud humming or growling noises during the drain cycle.

• Durability: Built with sealed motor bearings and a debris-resistant impeller for a long service life.

• Install: Access typically requires removing the front or rear panel, depending on your model. Unplug the washer and have a bucket ready to catch residual water before disconnecting the hoses.

Pro Tip: Before replacing the entire motor, check the drain filter (pump trap) at the bottom front of the machine. Often, a stray coin or bobby pin gets stuck in the impeller, causing the motor to hum without pumping. If the impeller is clear but the motor still won’t run, it’s time for a new assembly.